Description

COMPATIBLE: (6.2L – LS3)

2008 – 2009 PONTIAC G8 GT

2008 – 2009 PONTIAC G8 GXP

Roto-fab’s 2008-9 G8 GT and GXP High Flow cold air intake system gives your G8 more air to accommodate your higher HP build.

Custom tuning is required for this system. Failure to do so could result in engine damage.

The Roto-fab High Flow G8 V8 cold air intake system gives you larger duct work from the filter all of the way to the throttle body. This system includes a new custom molded larger inlet elbow, 4 inch OD MAF sensor housing which accepts the card style MAF sensor (sensor not included) and a larger air box adapter duct which is coupled to our oversize air filter.

All of the correct silicone couplers are supplied as well. This system will now give you 3.8 inch to 3.9 inch ID from the MAF sensor housing throughout the entire length of the duct work. Please keep in mind this style of MAF sensor does require tuning to your G8. To accommodate a 102/103 mm throttle body, a straight 4.25 inch silicone coupler is available separately. (part number 10132048)

The Roto-fab Pontiac G8 high flow cold air intake system is available as a complete unit or as an upgrade kit for those who already have our G8 V8 intake system.

All oil filters come pre-oiled and ready for use. This filter requires 52 grams of oil when servicing. The replacement filter is part number 10135002.

ABOUT ROTO-FAB

In 1998, Roto-fab began designing and manufacturing aftermarket automotive components on a private label basis. After nearly a decade of developing and manufacturing automotive products for others, the first Roto-fab branded parts were introduced. In only a few short years, the company has experienced tremendous growth and acceptance among car enthusiasts.

The key to success has been providing truly unique products that perform as they should, fit the car well, and install easily without modifications to the vehicle. Combine that with outstanding customer service and the result is a satisfied end user!

The design approach is simple. We design the best products possible with little regard to tooling expense or manufacturing difficulty. Roto-fab products start as hand-made working prototypes that are relentlessly refined until the desired performance level, fit, and appearance are reached. There is no settling for less! The final prototype is then reverse engineered to create tooling and fixtures for production. By implementing this approach, the final product has all of the ingenuity and custom touches of a “one-off” hand fabricated piece. With two rotational molding machines for plastic molding as well as a complete metal fabrication shop, Roto-fab has the flexibility to design and manufacture it’s own plastic and metal products in-house. This unique freedom in manufacturing is one of the major qualities that set Roto-fab apart from the others.

As growth continues, rest assured Roto-fab will never lose track of individual customer service both before and after your purchase. Customer satisfaction and word of mouth has been our greatest marketing asset to this point; therefore, it only makes sense to continue down the path that has brought so much success already.

WARRANTY: